Custom Wood Milling

State of the Art Milling Facility

You dream it, we make it!

J&W Lumber has the experience and infrastructure that will allow you to set no limit on your outdoor project. We offer a full range of milled redwood and cedar products, making tongue-and-groove, shiplap, hill n’dale, beveled siding, molding and fascia just to name a few.Mill_samples  Mill_T&G

Each store is equipped with an array of modern saws and experienced staff to take care of your custom product needs. Our main mill facility inclues a full-time crew, modern equipment, is the largest active Lumber Mill in San Diego county, and stands ready to run any size job.

Mill_Leadermac-Hypermac530 Mill-Baker_Model_CX

 

Need an old, existing pattern matched for your remodel or restoration project? No problem! Bring in a sample or detailed drawing and 99% of the time we’re able to match it.  Below are just some of the patterns we have matched over the years also a sample of bevel house siding that was matched and milled to the customers specs.

Here are just some of the patterns we have matched over the years.    This sample of shiplap house siding was matched and milled to the customers specs.

 

Custom corbels cuts are also available. We stock the hardware, stain, paper for the wall, and everything else you’ll need to do the job right. Select from a wide range of wood species and grades to get just the look you’ll be satisfied with. Check out the pattern catalogs below.

J_W_PatternCatalog_Bevel-1

Bevel Siding

Typically used for siding on houses, garages or other buildings; Bevel boards consist of one thicker side and one thinner side that are installed overlapping on top of each other. The Beveled style offers a unique look with depth that will make your house standout in the neighborhood. Pick from our library of existing patterns, bring in a sample for us to match, or dream up your own custom look.

Download Pattern Catalog

J_W_PatternCatalog_Decking-1

Decking

We are Southern California’s decking expert. Our wood milling experts stand ready to help you create the deck of your dreams. With our full mill capabilities we offer stock decking and custom styles sure to beautify your deck and make a big impression on your guests.

Download Pattern Catalog

J_W_PatternCatalog_Fencing-1

Fencing

In addition to the full line of standard fence boards on hand, we can mill almost any fence style. If you want a unique fence board, bring in your ideas and our staff can help you.

Download Pattern Catalog

J_W_PatternCatalog_Shiplap-1

Shiplap Siding

Typically used for siding on houses, garages or other buildings; Shiplap boards consist of a notch on the top of one side and a notch along the bottom of the other side. The board is then laid flat against the wall with the boards installed interlocking on top of each other. The Shiplap style looks great and is easy to install. Pick from our library of existing patterns, bring in a sample for us to match, or dream up your own custom look.

Download Pattern Catalog

J_W_PatternCatalog_T_G-1

Tongue and Groove Siding (T&G)

Typically used for siding on houses, garages, or other buildings; Tongue and Groove boards consist of a “tongue” on one side and an interlocking “groove” on the other side. The T&G style is popular because of the ease of installation and the professional look of the finished job. Pick from our library of existing patterns, bring in a sample for us to match, or dream up your own custom look.

Download Pattern Catalog

corbel-cuts-th

Corbel Cuts – Simple way to add character to your Patio Cover. Each of our six stores has the experience and right equipment to add decorative corbel cuts to the ends of the rafters, beams or other end pieces.

Download Corbel Options

knee-braces-th

Knee Braces – Installed to give additional strength. Pick from a variety of custom cut knee braces, milled to order at any one of our six stores.

Download Knee Brace Options

Re-Saw – We love to Freshen-Up the look of your lumber. Using our advanced mill equipment we’ll re-saw standard boards to bring out the natural beauty and give a unique texture. A re-sawn board just pops.

Planing – Leave this to the experts at J&W Lumber. Get the flat smooth finish you want, in the dimensions you need. Our industrial planing equipment can handle jobs of any size.

Other Standard Lumber Milling Services – Need special cuts and don’t have the equipment or time to do it on the job site? The milling experts at J&W Lumber are happy to do the milling for you, we have the right wood milling equipment and expertise to get it done right! Including rip, cross cut, dado, and more.